Location:Home>Company Info

Causes of High Temperature of Magnetic Yoke in Induction Smelting Furnace

Time:2024-03-22   Nums:2126

Reddening of magnetic yoke of induction smelting furnace is a common fault phenomenon. If there is no problem with the circulation of cooling water, it can usually be solved from the following aspects:

1. The yoke is aged and the interturn coating is severely corroded. Solution: open the silicon steel sheet for surface coating treatment.

2. The magnetic yoke is stuck with molten steel (iron filings). Solution: Grind the magnetic yoke and clear the iron filings.

3. After the above treatment, if the fault still exists, try to adjust the overheating yoke to a position close to the furnace mouth for installation.

4. Check the furnace bottom thickness. If the induction furnace bottom is too thick, the magnetic yoke will become hot and red.

Yiphee Electric Furnace Co.,Ltd specializes in producing induction furnace.Tel(WhatsApp):+86-13450756789, yiphee@yiphee.cn

rl026.JPG

Up:Protection shutdown when induction furnace power is increased

Next:Characteristics of induction furnace1