• ++86-13450756789
  • yiphee@yiphee.cn

Other

Sand blasting machine


Please read carefully the instructions and parameters of the operation before installation, operation, maintenance or inspectionThe instructions.


Safety note


1. The machine must be installed by professional personnel, otherwise it may result in personal safety or damage to the equipment.


2. The machine USES 220V/50Hz power supply, which should be powered by switch with reliable leakage protection devicePrevention of personal safety.


3. The machine must be reliably grounded.


Installation: the sandblasting machine should be installed on a flat and solid ground without the need of the anchor screws


Power connection and compressed air connection


1. Please confirm that the rated voltage, phase number and input voltage and phase number of the sandblasting machine are in accordance with the corresponding number before the wiring, otherwise


Can cause fire or personal injury.


2. The user can provide the pressure of 0.6mpa to dry clean air source and compressed air consumption


0.9m3/ min, the air pressure user will adjust according to the work piece.

Abrasive to join


Open the front door, and select the appropriate abrasive to add to the sand blasting machine according to the processing


For about 3-5kg, users can join in the actual situation.


Operating instructions


1. After the machine is connected to the power source, the air source and the abrasive, the power source and the gas source should be confirmed before starting the machinIf meet the above requirements, after the condition is satisfied, close the door hold the gun, step down foot pedal switch can work.


2. After working 3-8 hours, please pull the dust removal switch on the operation panel 3 times to remove the filter bagDust, increase the dust absorption effect.


The warranty agreement

Thank you for using our products to ensure that you can enjoy high quality clothing for your products

Please read the following terms carefully:


1. Product warranty scope


The failure occurred according to normal requirements.


2. Warranty period




The warranty period of our products is from the date of delivery, within twelve months. Over warranty period, our compan

Will provide a lifetime of paid maintenance services.


3. Non-warranty scope




Vulnerable parts and any damage caused by human accidents, natural disasters, etcDisassembly of equipment, modification and repair without permission shall be regarded as automatic waiver of warranty service.

Please read carefully the instructions and parameters of the operation before installation, operation, maintenance or inspectionThe instructions.


Safety note


1. The machine must be installed by professional personnel, otherwise it may result in personal safety or damage to the equipment.


2. The machine USES 220V/50Hz power supply, which should be powered by switch with reliable leakage protection devicePrevention of personal safety.


3. The machine must be reliably grounded.


Installation: the sandblasting machine should be installed on a flat and solid ground without the need of the anchor screws


Power connection and compressed air connection


1. Please confirm that the rated voltage, phase number and input voltage and phase number of the sandblasting machine are in accordance with the corresponding number before the wiring, otherwise


Can cause fire or personal injury.


2. The user can provide the pressure of 0.6mpa to dry clean air source and compressed air consumption


0.9m3/ min, the air pressure user will adjust according to the work piece.


Abrasive to join


Open the front door, and select the appropriate abrasive to add to the sand blasting machine according to the processing


For about 3-5kg, users can join in the actual situation.


Operating instructions


1. After the machine is connected to the power source, the air source and the abrasive, the power source and the gas source should be confirmed before starting the machinIf meet the above requirements, after the condition is satisfied, close the door hold the gun, step down foot pedal switch can work.


2. After working 3-8 hours, please pull the dust removal switch on the operation panel 3 times to remove the filter bagDust, increase the dust absorption effect.


The warranty agreement



Thank you for using our products to ensure that you can enjoy high quality clothing for your products


Please read the following terms carefully:


1. Product warranty scope


The failure occurred according to normal requirements.


2. Warranty period



The warranty period of our products is from the date of delivery, within twelve months. Over warranty period, our companWill provide a lifetime of paid maintenance services.


3. Non-warranty scope



Vulnerable parts and any damage caused by human accidents, natural disasters, etcDisassembly of equipment, modification and repair without permission shall be regarded as automatic waiver of warranty service.