Please read carefully the instructions and parameters of the operation before installation, operation, maintenance or inspectionThe instructions.
Safety note
1. The machine must be installed by professional personnel, otherwise it may result in personal safety or damage to the equipment.
2. The machine USES 220V/50Hz power supply, which should be powered by switch with reliable leakage protection devicePrevention of personal safety.
3. The machine must be reliably grounded.
Installation: the sandblasting machine should be installed on a flat and solid ground without the need of the anchor screws
Power connection and compressed air connection
1. Please confirm that the rated voltage, phase number and input voltage and phase number of the sandblasting machine are in accordance with the corresponding number before the wiring, otherwise
Can cause fire or personal injury.
2. The user can provide the pressure of 0.6mpa to dry clean air source and compressed air consumption
Abrasive to join
Open the front door, and select the appropriate abrasive to add to the sand blasting machine according to the processing
For
about 3
Operating instructions
1. After the machine is connected to the power source, the air source and the abrasive, the power source and the gas source should be confirmed before starting the machin，If meet the above requirements, after the condition is satisfied, close the door hold the gun, step down foot pedal switch can work.
2. After working 3-8 hours, please pull the dust removal switch on the operation panel 3 times to remove the filter bagDust, increase the dust absorption effect.
The warranty agreement
Thank you for using our products to ensure that you can enjoy high quality clothing for your products
Please read the following terms carefully:
1. Product warranty scope
The failure occurred according to normal requirements.
2. Warranty period
The warranty period of our products is from the date of delivery, within twelve months. Over warranty period, our compan，
Will provide a lifetime of paid maintenance services.
3. Non-warranty scope
Vulnerable parts and any damage caused by human accidents, natural disasters, etcDisassembly of equipment, modification and repair without permission shall be regarded as automatic waiver of warranty service.
Please read carefully the instructions and parameters of the operation before installation, operation, maintenance or inspectionThe instructions.
Safety note
1. The machine must be installed by professional personnel, otherwise it may result in personal safety or damage to the equipment.
2. The machine USES 220V/50Hz power supply, which should be powered by switch with reliable leakage protection devicePrevention of personal safety.
3. The machine must be reliably grounded.
Installation: the sandblasting machine should be installed on a flat and solid ground without the need of the anchor screws
Power connection and compressed air connection
1. Please confirm that the rated voltage, phase number and input voltage and phase number of the sandblasting machine are in accordance with the corresponding number before the wiring, otherwise
Can cause fire or personal injury.
2. The user can provide the pressure of 0.6mpa to dry clean air source and compressed air consumption
Abrasive to join
Open the front door, and select the appropriate abrasive to add to the sand blasting machine according to the processing
For
about 3
Operating instructions
1. After the machine is connected to the power source, the air source and the abrasive, the power source and the gas source should be confirmed before starting the machin，If meet the above requirements, after the condition is satisfied, close the door hold the gun, step down foot pedal switch can work.
2. After working 3-8 hours, please pull the dust removal switch on the operation panel 3 times to remove the filter bagDust, increase the dust absorption effect.
The warranty agreement
Thank you for using our products to ensure that you can enjoy high quality clothing for your products
Please read the following terms carefully:
1. Product warranty scope
The failure occurred according to normal requirements.
2. Warranty period
The warranty period of our products is from the date of delivery, within twelve months. Over warranty period, our compan，Will provide a lifetime of paid maintenance services.
3. Non-warranty scope
Vulnerable parts and any damage caused by human accidents, natural disasters, etcDisassembly of equipment, modification and repair without permission shall be regarded as automatic waiver of warranty service.